Announcement

Collapse
No announcement yet.

Truck & Trailer: Create Single Shipment with Multiple Equipment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Truck & Trailer: Create Single Shipment with Multiple Equipment

    Hello Experts,
    My requirement is to configure Truck & Trailer planned into two Equipment Groups with One Shipment.
    Truck has equipment Group : EG_TRUCK : 15Ton
    TRAILER has equipment Group: EG_TRAILER: 10Ton

    Both are grouped into Equipment Group Profile: EGP_TRUCK_TRAILER

    if I am executing bulk plan with a batch of 100 Orders, my expected result should be:
    Multiple shipments should be created and each Shipment having two Equipment Groups, EG_TRUCK and EG_TRAILER.

    In ITINERARY Leg following config has been done but still its creating one Equipment Group for each Shipment
    Create Single Shipment with Multiple Equipment
    Equipment Group Profile: EGP_TRUCK_TRAILER is linked to the ITINERARY LEG.


    Any guidance is greatly appreciated.
    Many Thanks!
    Ganesh

  • #2
    Hi Ganesh,

    The Shipment to Equipment Group relationship is 1 to 1, so you can't model your scenario the way you describe it.

    For your truck/trailer scenario, you may want to take a look at Fleet Management.

    Regards,

    Lourens

    Comment


    • #3
      Hi Lourens, Thanks & good to see your response.

      I've managed to get Shipments with multiple equipments as below:
      Shipment-1: 02 EquipmentS: EG_TRUCK & EG_TRUCK
      Shipment-2: 03 Equipments: EG_TRUCK, EG_TRUCK & EG_TRAILER

      My ITINERARY LEG Configuration:
      Create Single Shipment: Checkbox-ON
      Auto Consolidation Type: CONSOL INTO ONE SHIP MULTI EQUIP
      Equipment Assignment Type: Optimize Equipment

      I want to control the Number of Equipments to 02 and each time One Truck & Trailer combination of Equipment Group should be selected.
      I've check for any planning parameter or Logic config, but no luck yet.

      Warm Regards!
      Ganesh

      Comment


      • #4
        Hi All, I've manged to get this working.
        With that I would like to close this thread. Thanks!

        Comment


        • #5
          Originally posted by gpacharya View Post
          Hi Lourens, Thanks & good to see your response.

          I've managed to get Shipments with multiple equipments as below:
          Shipment-1: 02 EquipmentS: EG_TRUCK & EG_TRUCK
          Shipment-2: 03 Equipments: EG_TRUCK, EG_TRUCK & EG_TRAILER

          My ITINERARY LEG Configuration:
          Create Single Shipment: Checkbox-ON
          Auto Consolidation Type: CONSOL INTO ONE SHIP MULTI EQUIP
          Equipment Assignment Type: Optimize Equipment

          I want to control the Number of Equipments to 02 and each time One Truck & Trailer combination of Equipment Group should be selected.
          I've check for any planning parameter or Logic config, but no luck yet.

          Warm Regards!
          Ganesh
          HI Ganesh,

          I am trying plan the shipments using the combination equipment group but was not able to .
          Can you please share the setups(Itinerary,rates,parameter changes if any
          ,etc) that you are using.

          Regards,
          Sandeep

          Comment

          Working...
          X